Made from copper wire ,stainless steel motor housing and brass impeller the booster pump is widely used for the places where water pressure is not enough.
-NOT self priming.
-Suitable for shower rooms ,washing machines,gardens and other applications , can be fitted to water tanks ,wells ,pools and other water supply source.
– Voltage: 220V,50Hz
– Power: 230W
– Max Head: 15m
– Max Flow rate: 25L/Min
– Max RPM: 2850r/min
– Boost pressure up to: 1.5Bar
– Inlet/Outlet Caliber: 3/4″
– Motor: Copper Wire
– Body Material: Stainless steel
This pump can be used for hot water up to 100 degree. Switch Mode : For the auto activate: The pump will be automatically activated when the water flows through with the speed of 3-4l/min. For the manual activate: the pump can be activated by switching on, but be sure that there must be have water through the pump if you want to activate the pump manually.
Please note: a very small percentage of these have been reported to be faulty, all the cases were wrong installation problem.
Copper wire, copper impeller and stainless steel body, durable and for long time service
Auto or Manual activate switch modes. it boosts pressure automatically (up to 1.5Bar) when the tap is on, and turn off when the tap is off
Suitable for shower rooms, washing machines, gardens and other applications
Can be fitted to water tanks, wells, pools & other water supply source
Comes without plug and it is not self-priming, DO NOT RUN DRY, it may damage the seal and impeller